Resources

Solo Diving Safety Plan

Diving without a buddy means there's no one underwater to notice a problem, help with a gear failure, or decide to call the dive. A solo diver has to build each of those functions into the plan on purpose instead of skipping them. Here's what a real solo dive safety plan covers -- from training and gear redundancy to the one step that actually replaces having a buddy: telling someone on the surface exactly where you are and when to expect you back.

Illustration of a scuba diver descending into a dark underwater cave
Step 1
Get trained first

A self-reliant/solo specialty, or equivalent logged experience

Step 2
Carry redundant gear

A backup air source, mask, and cutting tool

Step 3
Plan conservative limits

Shallower, shorter, and inside your proven comfort zone

Step 4
Carry a surface signal

DSMB/SMB, plus a way to get topside attention

Step 5
Leave a plan on shore

Someone knows your site, entry time, and check-in deadline

Step 6
Write your own EAP

You're the diver and the responder if something goes wrong

Six things a solo dive plan has to cover that a buddy would otherwise catch.

Why solo diving needs its own safety plan

A buddy does more than keep you company: they do an independent gear check before the dive, watch your air and your behavior in real time, and are there to physically help or make the call to abort if something goes wrong. None of that disappears when you dive alone -- it just has no one else to do it. A solo dive plan exists to replace each of those functions with a specific gear choice, a tighter limit, or a step taken before you ever get in the water, rather than just diving the way you normally would and hoping nothing comes up.

Get trained before you dive alone

Most agencies offer a specialty built for this -- PADI's Self-Reliant Diver and SDI's Solo Diver are the two most common. They typically require Advanced Open Water certification, a meaningful number of logged dives (often cited around 100, though exact requirements vary by instructor and location), and a minimum age of 18. The course itself covers redundant equipment setup, gas management for diving without a buddy's backup air, and deploying a surface marker on your own.

This isn't just a formality. Many dive operators, charter boats, and dive parks simply won't let you dive without a buddy unless you can show a solo or self-reliant certification -- and some sites and marine reserves prohibit solo diving outright regardless of what you're certified for. Check the local rules before you build a trip around a solo dive.

Build redundancy into your gear

  • A backup air source (a pony bottle or similar), sized to actually get you from your planned maximum depth to the surface with reserve to spare -- not just a token amount of air
  • A backup mask, stowed somewhere you can reach it without help
  • A cutting tool or line cutter for entanglement, since there's no buddy to free you
  • A backup way to track depth and time -- a second dive computer, or at minimum a bottom timer and depth gauge if your primary computer fails
  • A backup light on any dive where visibility or time of day makes one necessary
Step 1
Backup air source

Sized to reach the surface from max depth, with reserve to spare

Step 2
Backup mask

Stowed somewhere you can reach it without help

Step 3
Cutting tool

For entanglement -- there's no buddy to free you

Step 4
Backup timing

A second computer, or a bottom timer and depth gauge

Step 5
Backup light

Whenever visibility or time of day makes one necessary

Five single points of failure a solo diver backs up that a buddy would otherwise cover.

Plan more conservatively than you would with a buddy

  • Turn the dive at a higher air reserve than your usual buddy-dive rule -- you're covering your own gas planning and your buddy's
  • Stay shallower and dive shorter than your certification technically allows
  • Pick sites and conditions inside what you've actually handled solo before, not just what you're certified for
  • Skip it if the conditions, your gear, or how you feel aren't all solidly good that day -- there's no buddy to talk you out of a bad call

Carry a way to call for help, above and below the surface

  • A DSMB/SMB and reel, deployed well before you surface, so anyone watching knows where you are
  • A whistle, signal mirror, or strobe for getting attention once you're on the surface
  • A personal locator beacon or satellite communicator if you're diving somewhere remote enough that shouting and waving won't reach anyone
  • A dive flag or float if you're shore diving anywhere near boat traffic

Leave your plan with someone who isn't diving

This is the step that actually replaces "a buddy would notice." Tell a specific person -- not a group chat, one person who'll actually check -- the exact site, your entry and exit point, your planned bottom time, and the time you'll check in by. Agree on what happens if you don't check in: who they call, and how soon. Without this step, a problem that would surface immediately with a buddy might not be noticed for hours.

Step 1
Tell one specific person

Not a group chat -- someone who will actually check

Step 2
Give the exact site

Entry point, exit point, and planned route

Step 3
Set a check-in deadline

Agree what time you'll confirm you're out

Step 4
Agree what happens if you miss it

Who they call, and how soon

The surface check-in plan that actually replaces "a buddy would notice."

Write your own Emergency Action Plan

A team EAP assumes someone else makes the call to EMS. Diving solo, that has to be you -- which means you need the same site-specific information (local emergency number, nearest hospital, nearest recompression chamber) carried with you, not just known in theory. Write down your own relevant medical information somewhere a first responder would actually find it, like a slate or a wetsuit pocket, in case you're the one who can't say it out loud.

Common mistakes that turn solo diving risky

  • Treating "I've done this dive before with a buddy" as equivalent preparation for doing it alone
  • Skipping the surface check-in because the dive is "just a quick one"
  • Relying on a single point of failure for air, light, or signaling instead of building in a backup
  • Diving somewhere that restricts or bans solo diving and hoping it doesn't come up
  • Pushing depth or conditions you've only handled with a buddy present, just because your certification allows it

Frequently asked questions

Do I need a certification to dive solo?

Not everywhere by law, but most dive operators, charter boats, and many parks and sites will refuse to let you dive without a buddy unless you hold a self-reliant or solo specialty -- and the training is genuinely useful even at sites where it isn't required.

What's the single most important piece of gear for solo diving?

There isn't one -- it's redundancy as a category. A backup air source and a way to signal for help matter more together than any single item does on its own.

Can I just use my regular dive plan for a solo dive?

No. A solo dive plan needs tighter limits and a surface check-in step a buddy-dive plan doesn't need, since no one underwater is tracking your air, time, or condition in real time.

Is solo diving allowed everywhere I'm certified to dive?

No. Some dive parks, marine reserves, and operators prohibit solo diving outright regardless of certification. Confirm local rules before planning a solo dive at a new site.

Dive Backup organizes information entered by the dive team. It does not calculate whether a dive is safe or replace training, certification, professional judgment, dive computers, agency standards, or a live predive briefing.

Filling this in on paper works until conditions change or a diver drops out. Dive Backup turns it into a shared, reviewable plan your whole team can see, so nothing gets decided verbally and forgotten.

Try Dive Backup free

No signup to start -- free forever for a single diver